SUPREMACYIN LEAK DETECTION
Book now
City guides

Pool leak detection in Garland, TX: a local guide

What the ground and the weather in Garland do to a pool, how to tell a leak from evaporation here, where we usually find leaks, and what leak detection costs in Garland.

By the Supremacy in Leak Detection teamUpdated 4 min read

Finished skimmer replacement with the deck patched around the new lid
On this page
  1. Leak detection in Garland: the short version
  2. What black clay does to a Garland pool
  3. Leak or evaporation in Garland?
  4. Where we find leaks in Garland pools
  5. Neighborhoods and nearby cities we cover
  6. Booking a leak detection in Garland

Leak detection in Garland: the short version

Garland is in Dallas County, about 15 miles northeast of downtown Dallas. Our Dallas–Fort Worth team covers it. Leak detection in Garland is $550 for a pool or a spa and $650 for both, the same price we charge across Dallas–Fort Worth. That covers every line pressure tested, a dive and dye test of the shell, simple leak stops included when it makes sense, and a photo and video report where available. You get the repair price before any work starts, and same-day service when possible.

What black clay does to a Garland pool

Most of Garland sits on the Blackland Prairie, the dark, heavy clay that runs through Dallas, Collin and Rockwall counties. That clay swells when it gets wet, then shrinks and cracks open when it dries. A pool is a rigid shell sitting in ground that moves, and the plumbing around it is glued PVC.

In a long dry summer the clay pulls away from the shell and the lines lose their support. When the fall rains come back, it swells and pushes. Year after year that movement works on the joint between the skimmer and the shell, the fittings under the deck and the seal between the deck and the coping. That is why so many leaks here show up after a dry spell followed by heavy rain.

Pool deck cut open in one spot to reach the lines underneath
What we look for in a Garland pool: black clay changes where leaks start and where the water goes.

Keeping the soil around the deck evenly moist through the summer, the same idea as watering a foundation, helps keep the clay from shrinking away from the pool.

Leak or evaporation in Garland?

On a hot, windy July day a Garland pool can lose about a quarter inch to evaporation, a bit more when the air is dry. In winter it is a small fraction of that. If your pool drops more than that, or keeps dropping when the weather cools, it is worth a closer look.

The easiest check is a bucket test: a bucket of pool water on the pool step, marked inside and out, for 24 hours with the auto-fill off. If the pool drops more than the bucket, the difference is water leaving through a leak. Our leak checker compares your numbers with the weather where you are.

Where we find leaks in Garland pools

  1. The skimmer. The joint between the skimmer and the shell takes the most stress when the clay moves. More on this.
  2. Lines under the deck. Fittings crack where the ground has settled or heaved. More on this.
  3. The light. The conduit and the seal around the light niche. More on this.
  4. Cracks in the shell or the bond beam. From ground movement over the years. More on this.
  5. The equipment pad. Unions, valves and the pump lid, where a drip can spray only with the pump on. More on this.

Every pool is different, so we test the whole system instead of guessing: how a leak detection works.

Neighborhoods and nearby cities we cover

We cover every neighborhood in Garland, and the homes, HOAs and businesses around it.

Close by, we also cover:

Homeowners, home buyers and realtors, pool service companies, HOAs, apartments and hotels all book with us. See commercial pools or every area we cover.

Booking a leak detection in Garland

Book online in about a minute, or text us your address. Before we come, keep the water clear with no algae, the pool at its normal level and the pump running a few hours. You do not need to be home: we send the report either way. Financing is available on everything we do, including the repair estimate, subject to approval.

Questions

How much does pool leak detection cost in Garland?

$550 for a pool or a spa and $650 for both. Fountains and water slides are included; other water features and extra pumps are $99 each. Every line is pressure tested, and you get a photo and video report where available and the repair price before any work.

How soon can you come to Garland?

Same-day service when possible. Our Dallas–Fort Worth team covers Garland; book online or text your address and we confirm the day and time by text and by email.

Why does my Garland pool start leaking after a dry summer?

The clay under Garland shrinks and cracks when it dries out, and the pool and its lines lose support. When the rain comes back the clay swells and pushes. That movement is hard on the skimmer joint and on fittings under the deck, so leaks often show up right after a dry spell ends.

Do you work on HOA, apartment and hotel pools in Garland?

Yes. We test community pools, apartment and hotel pools, rooftop pools and city pools, with the same flat price up to 30,000 gallons and a custom quote for bigger pools.

Keep reading

All articles

Book nowTextCall