SUPREMACYIN LEAK DETECTION
Book now
City guides

Pool leak detection in Bee Cave, TX: a local guide

What the ground and the weather in Bee Cave do to a pool, how to tell a leak from evaporation here, where we usually find leaks, and what leak detection costs in Bee Cave.

By the Supremacy in Leak Detection teamUpdated 4 min read

New PVC fittings glued into a pool line in rocky ground
On this page
  1. Leak detection in Bee Cave: the short version
  2. Hill Country limestone and hillside pools in Bee Cave
  3. Leak or evaporation in Bee Cave?
  4. Where we find leaks in Bee Cave pools
  5. Neighborhoods and nearby cities we cover
  6. Booking a leak detection in Bee Cave

Leak detection in Bee Cave: the short version

Bee Cave is in Travis County, about 10 miles west of downtown Austin. Our Austin team, based in West Lake Hills, covers it. Leak detection in Bee Cave is $700 for a pool or a spa and $800 for both, the Austin-area price. Add-ons cost the same as everywhere else. That covers every line pressure tested, a dive and dye test of the shell, simple leak stops included when it makes sense, and a photo and video report where available. You get the repair price before any work starts, and same-day service when possible.

Bee Cave and Spanish Oaks have large custom pools on limestone, often with vanishing edges and long runs to the equipment.

Hill Country limestone and hillside pools in Bee Cave

Bee Cave is limestone country: thin soil over rock, with lots built into hillsides. Pools here are often cut into rock or built out from the slope on retaining walls, and many have vanishing edges facing the view. Rock is stable, but water from a leak can follow cracks in the rock and come out far from where it started.

On a vanishing edge pool, the catch basin and its plumbing are some of the first places we test. Water spilling over the edge also evaporates faster, so a vanishing edge loses more water than a plain pool even with no leak. We measure the two apart.

A cracked elbow on a pool line in rocky soil
What we look for in a Bee Cave pool: Hill Country limestone changes where leaks start and where the water goes.

If you have a vanishing edge, tell us when you book. We bring what we need to test the catch basin and its lines.

Leak or evaporation in Bee Cave?

Hot, dry wind in the hills can take a quarter inch or more a day from a Bee Cave pool in summer, and more from a pool with a vanishing edge or waterfall running. If your pool drops more than that, or keeps dropping when the weather cools, it is worth a closer look.

The easiest check is a bucket test: a bucket of pool water on the pool step, marked inside and out, for 24 hours with the auto-fill off. If the pool drops more than the bucket, the difference is water leaving through a leak. Our leak checker compares your numbers with the weather where you are.

Where we find leaks in Bee Cave pools

  1. Vanishing edge catch basins. The basin, its lines and the auto-fill. More on this.
  2. Lines cut through rock. Water follows the rock, so the wet spot can be far from the leak. More on this.
  3. The skimmer. The most common leak spot in any pool. More on this.
  4. The spa and spillway. Raised spas have their own plumbing and shell. More on this.
  5. The light. The conduit and the seal around the light niche. More on this.

Every pool is different, so we test the whole system instead of guessing: how a leak detection works.

Neighborhoods and nearby cities we cover

In and around Bee Cave we cover every neighborhood, including Spanish Oaks, Falconhead and Lake Pointe.

Close by, we also cover:

Homeowners, home buyers and realtors, pool service companies, HOAs, apartments and hotels all book with us. See commercial pools or every area we cover.

Booking a leak detection in Bee Cave

Book online in about a minute, or text us your address. Before we come, keep the water clear with no algae, the pool at its normal level and the pump running a few hours. You do not need to be home: we send the report either way. Financing is available on everything we do, including the repair estimate, subject to approval.

Questions

How much does pool leak detection cost in Bee Cave?

$700 for a pool or a spa and $800 for both. Fountains and water slides are included; other water features and extra pumps are $99 each. Every line is pressure tested, and you get a photo and video report where available and the repair price before any work.

How soon can you come to Bee Cave?

Same-day service when possible. Our Austin team covers Bee Cave; book online or text your address and we confirm the day and time by text and by email.

Is my vanishing edge pool in Bee Cave leaking, or just losing water over the edge?

A vanishing edge loses more water than a plain pool because more surface is exposed and the water spills and splashes. That is normal. If the level keeps dropping with the pumps off and the edge not running, or the catch basin will not hold water, we test the basin, its lines and the auto-fill.

Do you work on HOA, apartment and hotel pools in Bee Cave?

Yes. We test community pools, apartment and hotel pools, rooftop pools and city pools, with the same flat price up to 30,000 gallons and a custom quote for bigger pools.

Keep reading

All articles

Book nowTextCall